Shields

4 Channels High Power LED driver shield
4 Channels High Power LED driver shield
  • Model: HPLED1SH
  • Shipping Weight: 0.1Kg
  • Units in Stock: 8
  • Manufactured by: EtherMania

Price:  

Details: On stock NOW!

This shield is able to drive 4 High Power LED strings. Each channel provides 350mA and is current limited. That means you can connect series more than one LED without care about series resistors.

The four channels could be used to drive three RGB LED series and one White serie letting you able to generate complex colors and ambiences.
If you're interested only in white light, the four channels could be used to drive a big number of LEDs though a single shield.

The shield could be powered with voltages in 8Volt till 28Volts. A jumper let you able to power the Arduino board (or to power up the shield and the LEDs trough the Arduino Power connector). An external power connector is required for voltages more than 12Volt.

Please consider than, when all four channels are actives, the overall shield will require 1.4Amps.



Technical documentation (click on the PDF image, requires Acrobat Reader)
Sketch Test Example (click on the ZIP image)