Shields

In this area you can find Shields for Arduino.
Shields are add-on boards that could enhance the Arduino's capabilities adding sophisticated Input/Output stages.

Add to compare
up to 4 items

1 2 Next >>

Displaying 1 to 12 (of 18 products)

Product Image	Quantity	Item Name+	Price
Add to compare	128	15mm Strip 6 and 8 ways Pair of 1 8ways and 1 6ways Female/Male strip, very useful to be used for Arduino boards extensions. Dimensions: plastic body 8.5mm - pins 15mm - total 23.5mm.	Contact Us
Add to compare	8	4 Channels High Power LED driver shield On stock NOW! This shield is able to drive 4 High Power LED strings. Each channel provides 350mA and is current limited. That means you can connect series more than one LED without care about series resistors. The four channels could be used to drive three RGB LED series and one White serie letting you able to generate complex colors and ambiences.If you're interested only in white light, the...	Contact Us
Add to compare	3	Ardumoto - Moto Driver Shield This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF. Control for motor attached to OUT1/2 is connected to digital line...	Contact Us
Add to compare	4	CAN Bus Shield This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBDII cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module. Making this shield ideal for data logging application. Features...	Contact Us
Add to compare	1	Color LCD Shield The Color LCD Shield, recommended by and designed in partnership with an SFE customer, provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5). The Nokia 6100 LCD is controlled through a...	Contact Us
Add to compare	1	GPS Shield with EM-406A SiRF III module Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch (check below), you will be able to locate your exact position within a few meters. A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not included and can be...	Contact Us
Add to compare	2	MIDI Shield The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI's event messages. The MIDI Shield provides an opto-isolated MIDI-IN port...	Contact Us
Add to compare	1	MP3 Player Shield This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an SD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode...	Contact Us
Add to compare	1	Music Instrument Shield Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/pair of headphones to the 1/8" stereo jack on the shied...	Contact Us
Add to compare	1	Mux Shield If you need a lot of inputs and/or outputs, this is your solution! The Mux (Multiplexer) Shield adds the capacity for up to 48 inputs or outputs on the Arduino and Arduino Mega. Using three Texas Instruments CD74HC4067 Analog Multiplexers, the Mux Shield makes it possible to have 48 analog/digital inputs or digital outputs in many configurations. The Mux Shield comes with stackable headers...	Contact Us
Add to compare	1	Proto Screw Shield The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED. This product includes all the parts shown and comes in...	Contact Us
Add to compare	8	RS485 Shield The RS485 serial bus is a standard mainly present on industrial buildings and home automation systems. Data are transmitted differentially on a single twisted pair resulting in a high noise immunity system able to transport data over hundreds of meters. This shield, compatible with Arduino and Netduino, allows the integration of that platforms with RS485 compliant equipments. This shield could...	Contact Us

Displaying 1 to 12 (of 18 products)

1 2 Next >>

Information