Sensors

Devices able to interface Arduino with the environment.

Add to compare
up to 4 items

1 2 Next >>

Displaying 1 to 12 (of 17 products)

Product Image	Quantity+	Item Name	Price
Add to compare	1	Relative pressure sensor with analog output The MP3H6115A series piezoresistive transducer is a state-of-the-art, monolithic, signal conditioned, silicon pressure sensor. This sensor combines advanced micromachining techniques, thin film metallization, and bipolar semiconductor processing to provide an accurate, high level analog output signal that is proportional to applied pressure. This sensor could be interfaced with ArduinoÂ throug an...	Contact Us
Add to compare	1	Temperature sensor with analog output This Temperature Sensor allows to obtain the temperature level from the environment with a wide measurement range (-40°C to +125°C). It provides an analog output voltage proportional with the measured temperature. Their analog output could be connected directly to an Arduino analog input pin. It's molded in a TO-92 case, compatible with the breadboard. This sensor operates with a wide power...	Contact Us
Add to compare	2	Non Invasive Passive Current Sensor, 30A This non-invasive current sensor (also known as a "split core current transformer") can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate...	Contact Us
Add to compare	2	Unipolar digital output Hall Effect Sensor The SS445P sensor is small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, designed to respond to a single South pole . Â These unipolar sensors are designed to meet the requirements of a wide range of potential applications. The internal pull-up resistor often eliminates the need for external components. This lets you...	Contact Us
Add to compare	3	Current transducer 6A This unipolar current transducer works using of the Hall effect. It's able to measure current till 6Amps and could be adapted for three different scale range simply modifying the connection between pins (2, 4 and 6Amps). This sensor has galvanic isolation between the primary circuit and the secondary circuit so you can use it to measure current of high voltage operating loads. Using it is very...	Contact Us
Add to compare	3	LPG Gas Sensor - MQ-6 This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor's output is an analog resistance. The drive circuit is very simple; all you need to do is power the...	Contact Us
Add to compare	4	Temperature sensor with digital I2C output This Temperature Sensor allows to obtain the temperature level from the environment with a wide measurement range (-55Â°C to +125Â°C). It provides a 12 bits digital value proportional with the measured temperature through the I2C two wire interface. It's molded in a SOIC 8 case, so you need a little patience to solder it on an Arduino prototype board.. but it's not impossible! This sensor...	Contact Us
Add to compare	5	Alcohol Gas Sensor MQ-3 This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and fast response time. Sensor provides an analog resistive output based on alcohol concentration. The drive circuit is very simple, all it needs is one resistor. A simple interface could be a 0-3.3V ADC. Please review the datasheet for conversions to...	Contact Us
Add to compare	5	Humidity sensor with analog output The Honeywell HIH-5030 Series Low Voltage Humidity Sensor s operate down to 2.7V, often ideal in battery-powered systems where the supply is a nominal 3V. The HIH-5030 Sensors feature covered integrated circuits and are designed for high volume OEM users. The Honeywell Low Voltage Humidity Sensors provide excellent resistance to dust, dirt, oils, and common environmental chemicals. More details...	Contact Us
Add to compare	5	Hydrogen Gas Sensor - MQ-8 This is a simple-to-use compressed hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 100 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor's output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load...	Contact Us
Add to compare	7	Ambient Light Sensor This is a small light ambient sensor acting as a NPN transistor. It's really easy to use: the more the sensor is exposed to the light, the stronger the base bias. Product datasheet (click on PDF icon, Acrobat Reader is required)	Contact Us
Add to compare	8	Methane CNG Gas Sensor - MQ-4 This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor's output is an analog resistance. The drive circuit is very simple; all you need to do is power...	Contact Us

Displaying 1 to 12 (of 17 products)

1 2 Next >>

Information

Search