Shields

In this area you can find Shields for Arduino.
Shields are add-on boards that could enhance the Arduino's capabilities adding sophisticated Input/Output stages.

Add to compare
up to 4 items

1 2 Next >>

Displaying 1 to 12 (of 18 products)

Product Image	Quantity	Item Name	Price+
Add to compare	128	15mm Strip 6 and 8 ways Pair of 1 8ways and 1 6ways Female/Male strip, very useful to be used for Arduino boards extensions. Dimensions: plastic body 8.5mm - pins 15mm - total 23.5mm.	Contact Us
Add to compare	3	Shield MEGA Proto PCB - Board It allows to mount and add your own circuits to Arduino MEGA board. PCB only.	Contact Us
Add to compare	1	Shield Proto PCB assemblata - Rev 3 It allows to mount and add your own circuits to Arduino boards and Arduino Rev 3 boards. PCB with SOLDERED HEADERs	Contact Us
Add to compare	1	Proto Screw Shield The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED. This product includes all the parts shown and comes in...	Contact Us
Add to compare	2	MIDI Shield The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI's event messages. The MIDI Shield provides an opto-isolated MIDI-IN port...	Contact Us
Add to compare	1	Mux Shield If you need a lot of inputs and/or outputs, this is your solution! The Mux (Multiplexer) Shield adds the capacity for up to 48 inputs or outputs on the Arduino and Arduino Mega. Using three Texas Instruments CD74HC4067 Analog Multiplexers, the Mux Shield makes it possible to have 48 analog/digital inputs or digital outputs in many configurations. The Mux Shield comes with stackable headers...	Contact Us
Add to compare	3	Ardumoto - Moto Driver Shield This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF. Control for motor attached to OUT1/2 is connected to digital line...	Contact Us
Add to compare	8	RS485 Shield The RS485 serial bus is a standard mainly present on industrial buildings and home automation systems. Data are transmitted differentially on a single twisted pair resulting in a high noise immunity system able to transport data over hundreds of meters. This shield, compatible with Arduino and Netduino, allows the integration of that platforms with RS485 compliant equipments. This shield could...	Contact Us
Add to compare	8	4 Channels High Power LED driver shield On stock NOW! This shield is able to drive 4 High Power LED strings. Each channel provides 350mA and is current limited. That means you can connect series more than one LED without care about series resistors. The four channels could be used to drive three RGB LED series and one White serie letting you able to generate complex colors and ambiences.If you're interested only in white light, the...	Contact Us
Add to compare	1	Spectrum Shield This shield features the MSGEQ7 graphic equalizer display filter, the same IC used in the Colorganic Spectralizer kit. Two of these ICs allow you to split a stereo audio input into 7-bands (per channel) and read the amplitude of each using the ADC on your Arduino. The shield is populated with two 1/8" stereo jacks (like you would find on a pair of headphones). One serves as a stereo input...	Contact Us
Add to compare	1	Music Instrument Shield Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/pair of headphones to the 1/8" stereo jack on the shied...	Contact Us
Add to compare	1	SI4735 AM & FM Receiver Shield The Si4735 is the first digital CMOS AM/FM radio receiver IC that integrates the complete tuner function from antenna input to audio output. This feature-rich solution includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (RDS) and the North American Radio Broadcast...	Contact Us

Displaying 1 to 12 (of 18 products)

1 2 Next >>

Information