Shields

In this area you can find Shields for Arduino.
Shields are add-on boards that could enhance the Arduino's capabilities adding sophisticated Input/Output stages.

Add to compare
up to 4 items

1 2 Next >>

Displaying 1 to 12 (of 18 products)

Product Image	Quantity	Item Name	Price-
Add to compare	1	GPS Shield with EM-406A SiRF III module Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch (check below), you will be able to locate your exact position within a few meters. A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not included and can be...	Contact Us
Add to compare	2	Xbee Shield The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream Series 2. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields...	Contact Us
Add to compare	10	WeatherShield Pressure, Temperature, Humidity The WeatherShield is a unit that allows Arduino able to read Pressure, Temperature and Relative Humidity.The shield is equipped with three sensors and a PIC12F683 microcontroller programmed with a specific firmware that interfaces with Arduino through a two line bidirectional synchronous serial connection. The microcontroller is responsible for sampling and averaging the last 8 humidity, pressure...	Contact Us
Add to compare	1	Color LCD Shield The Color LCD Shield, recommended by and designed in partnership with an SFE customer, provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5). The Nokia 6100 LCD is controlled through a...	Contact Us
Add to compare	4	CAN Bus Shield This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBDII cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module. Making this shield ideal for data logging application. Features...	Contact Us
Add to compare	1	MP3 Player Shield This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an SD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode...	Contact Us
Add to compare	1	SI4735 AM & FM Receiver Shield The Si4735 is the first digital CMOS AM/FM radio receiver IC that integrates the complete tuner function from antenna input to audio output. This feature-rich solution includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (RDS) and the North American Radio Broadcast...	Contact Us
Add to compare	1	Music Instrument Shield Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/pair of headphones to the 1/8" stereo jack on the shied...	Contact Us
Add to compare	1	Spectrum Shield This shield features the MSGEQ7 graphic equalizer display filter, the same IC used in the Colorganic Spectralizer kit. Two of these ICs allow you to split a stereo audio input into 7-bands (per channel) and read the amplitude of each using the ADC on your Arduino. The shield is populated with two 1/8" stereo jacks (like you would find on a pair of headphones). One serves as a stereo input...	Contact Us
Add to compare	8	4 Channels High Power LED driver shield On stock NOW! This shield is able to drive 4 High Power LED strings. Each channel provides 350mA and is current limited. That means you can connect series more than one LED without care about series resistors. The four channels could be used to drive three RGB LED series and one White serie letting you able to generate complex colors and ambiences.If you're interested only in white light, the...	Contact Us
Add to compare	8	RS485 Shield The RS485 serial bus is a standard mainly present on industrial buildings and home automation systems. Data are transmitted differentially on a single twisted pair resulting in a high noise immunity system able to transport data over hundreds of meters. This shield, compatible with Arduino and Netduino, allows the integration of that platforms with RS485 compliant equipments. This shield could...	Contact Us
Add to compare	3	Ardumoto - Moto Driver Shield This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF. Control for motor attached to OUT1/2 is connected to digital line...	Contact Us

Displaying 1 to 12 (of 18 products)

1 2 Next >>

Information